Stugotz

Hare to dial in something from your description... Vortex has some very cost effective solutions at various price points etc. http://www.vortexoptics.com/category/riflescopes

Please vote, copy the link and email to all your like minded friends. http://www.pbs.org/newshour/updates/poll-support-connecticut-gun-law-state/

My bad, you are correct, I just Googled the PVS 14 and the mount is entirely different.

I called the people at ITT L3 and told them I had an Insight Technology NVM-001 0B107 night vision monocular. They recommended I use a NVM-024 weapons mount. ( I have used this with an Eotech EXPS3 in the past and am currently using this with an Aimpoint M4s). I use the following for IR Illumination: I mounted an EagleTac T25C2 (Custom LED - 3.4w IR Infrared 850nm) with a weapons kit, 7" straight cord on/off switch.

Yes I the EXPS3 & G33 plastic cases, sold the hardware though...

I used an Eotech for about a year and a half, had the chance at the range to try an Aimpoint M4 and immediately dumped the Eotech. I picked up a Comp M4s (scope only) and mounted it on a GGG quick detach and riser. I'm grouping consistently better with it than I was with the Eotech. I am firmly entrenched in the Aimpoint optics camp.

Came across this regarding the self-absorbed pretty boy - https://www.facebook.com/pages/Supaturk/149495791785204

Had to Share this. Bodybuilders Against Guns... Apparently he is upset that a certain segment of the population does not share his sediments... (Care to post something on his web page?!?) :D

Here's a link: http://www.majorpandemic.com/2012/01/jp-enterprise-ar15-barrel-kit-review.html "If you opted for the JP Thermal Dissipator, it attaches to the thinner barrel profile between the gas block and receiver. The Dissipator increases barrel stiffness and provides 700% more surface area and seven times the cooling of a standard barrel profile, increased barrel life and accuracy, and improved heat management for more comfortable high rate shooting. Because of the heat dissipation abilities, heat distortion is limited and barrel temperatures are controlled even during sustained firing. The Dissipator is available for .650” and .750” barrel profiles in black, red, blue, and white anodized finish and will fit other barrels with those profiles. The red looks sharp peeking thought the handguard. Seems like someone should have taken this queue from the electronic industry and installed heat sinks long ago."

No, I personally do not like how it looks, in theory it's suppose to do a very good job of dissipating heat though.

JP Enterprises Thermal Dissipator maybe?!?

I have the SureFire, works phenomenally well! http://youtu.be/qmnhDYetFpw

I use a Gunslick 36" carbon fiber rod with a JP Enterprises JPRG-1 guide (local company and I use a number of other JP products in my precision AR builds). Hoppe's, brass brushes, both stab and slot jags and various size patches (jag dependent) and clean regularly with exceptional accuracy results.

NightForce 3.5-15x56 ZeroStop

I'll 2nd that.

Chris, Thanks so much for the ticket, really enjoyed the Game Fair with my daughter today! Mike

Suggestions?

Dear Abby: I recently read your column advising grandparents on "tough love." It offered advice to grandparents with respect to misbehaving grandchildren those whose own parents let them run wild. I have followed your advice, and enclose a picture demonstrating the technique I employ on my grandson when he just won't behave. They do not allow me to spank him, so I just take him for a ride, and he usually calms down afterward. Sincerely, Tough Love Grandma

A rigid upper certainly won't hurt things, but at that point you are getting a LOT less return for your money, plus your probably going to add a little weight overall.

Hopfully we will see the same effect on ammo price/availibility...

I also own a 10/22 Ruger and a few years back decided to do a little work on the hammer/sear assembly. Initally the triggr pull was very chrisp with reduced creep, but eventually my work resulted in doubles... I opened it up again and replaced this assembly with aftermarket upgrades and now have no worries on chain fires. Well worth the few dollars spent.

Hello All, I'm in the process of building my a new AR and just wanted to post up some specs for it as follows: Noveske/Vltor MUR-1A upper with bolt assist Vltor Low-Profile Gas Block BCM Charging Handle JPBC-3 SP Polished Stainless Low Mass Carrier Schreyer Weapon Systems SWS-15 Lower Receiver Geissele Hi-Speed Match Rifle trigger JP Silent capture spring ERGO Tactical Deluxe Grip Magpul PRS stock Lothar Walther 18" barrel length, 8" twist, stainless, .223 Wylde chamber Noveske NSR 13.5" handguard SureFire MB556K Muzzle Brake Bobro 1 piece 30MM Precision Optic Mount Nightforce 3.5-15x56 - NP-R1 Reticle I'm approx. 4~5 weeks out on receiving all of the components, and will post pictures once the build is complete! (My B-day present to myself).

Just curious as to why you won't shoot this stuff out of your rifles, and what may be your preference in ammo. TIA!

Atomic Arms in Bloomington will do it for $15 go in and see David, great guy to deal with!

I'm just finishing a new build, and recently moved from the West Metro down to Eagan. Are you still looking for someone to shoot with?