Jump to content

Gasbar

Members*
  • Content Count

    29
  • Joined

  • Last visited

Community Reputation

8 Neutral

Profile Information

  • Location
    Warsaw, NY
  • State and Country Flags
    United States
  1. Gasbar

    $600 AR-10!

    I have both, and love them both equally. The M1A is cool in an old school steel and wood way, and I have 100% confidence in it to be SHTF option. Plus the Garand/M14/M1A have the best factory irons every put on a rifle. Mine is in the original 22" standard configuration. My 16" 308 AR is just a blast. Big boom, in a small handy package. Way easier to swap parts/mod the way I want, and way easier to put optics on. Mine has been 100% reliable through it's life, others have not been so lucky, as it can be a finicky platform. My buddy has a Socom 16, and after a long range day with 16" .308's my AR is less fatiguing to shoot. The recoil impulse on it is softer and different than the M1A. My M1A was $1000+ new, I don't have more than $500 (minus optics) into my 308 AR................sort of. I traded an old import marked beater M1 carbine for it at the LGS that I paid $300 for a long long time ago, and I only had to pay sales tax/transfer fee, and for the parts my LGS uses to make them NYS compliant (mag lock, extended rear take down pin, and 10 rd pmag to fixed into the rifle). After adding some magpul furniture to replace the plain jane factory stuff, a rear BUS, getting rid of the railed Alum. gas block for a pinned FSB, and adding some reliability enhancements to the BCG that long time 308 AR users recommended, I have a rifle that runs like a top, and shoots excellent for not a lot of money.
  2. Gasbar

    Dedicated AR w/Irons?

    My 20" AR is an iron sight's only rifle. Pinned FSB with an LMT A2 style rear sight w/o the carry handle. I love it. The rest of my AR's wear either red dots, or low powered scopes. Not a fan of big magnification nor does anything above about 4x suit my needs/shooting style. My other iron sight only rifles are my old school stuff....Garand, M1 Carbine, M1A, etc...
  3. Gasbar

    Favorite pistol powders

    I do, it's not my "go-to" but it works well for 9mm and 45 acp. When I am loading with 800x I get out the old Lee Dippers, as I have found it the best way to handle that powder. Published load data for 9mm and 45ACP using 800x is laughable at best. I found the .7cc dipper which throws about 6.5 grains of 800x works excellent with no pressure signs for 115gr RN plated Xtreme 9mm. The same dipper with 45 ACP using 230 grain RN Xtreme plated bullets makes a very, very mild load that has always functioned my 1911's and other 45's flawless, and my wife likes shooting that load a lot better than my (and everyone else's) standard 5 grain bullseye load with the same bullets. It's just such a PITA to load fast and in volume when your having to dip each charge. The saving grace of this powder is that it's cheap, and during the powder panics always seems to be available as it's often overlooked by a lot of pistol handloaders. Some people will say it leaves behind a lot of un-burnt powder, but I don't think it's any better/worse, or any dirtier than most, it's just that the flakes are so huge that you can see any un-burnt ones very easy. My "go-to" powder for 9mm and 45 is Bullseye, followed by HP-38, then 800x.
  4. I bought 15 rifles from the CMP ( a mix of Garands, carbines, 03's, 1917's) between 2001-2007. I have kept my best/favorite 2 (one Garand, one Carbine) and they ain't going anywhere. I'll play the wait and see game on these. I would like to pick up one more Garand to convert to 308 now that I have other .308's to share ammo with.
  5. Gasbar

    HELP! Trouble with removing my FSB

    Are you trying to knock them out in the right direction? They only go one way if they are the usual taper pins used on 99.9% of FSB's. Most of the time they GO OUT from left to right, you should, by looking at the heads of the pin see that one end is slightly bigger than the other.
  6. Gasbar

    What vice block for building upper?

    I own and have used the plastixrevolution ones for several 308 barrel installs, works great. For 5.56 barrel installs, I have borrowed my buddies magpul bevblock and it's the cat's meow.
  7. Gasbar

    Best first scope choice?

    Bushnell AR optics are very good for the money. IMHO they are better than Vortex in that price range. Once you get above the $300 range the Vortex's start to shine. The Bushnell 1-4 x 24 second focal plane, model # AR91424 can be had for less than $150 most places, and combined with an Aero Precision LW mount, is a hard "budget" combo to beat.
  8. Gasbar

    Small base dies for the AR platform

    FWIW...I have loaded 10's of thousands of 223 rounds for my AR's and have never needed small base dies, even with using unknown sourced range brass that may or may not have been MG fired. Now, 308, that's a different story. I don't have small base dies for that either, but I avoid MG fired brass like the plauge, as I have had issues with it in the past. If I stick to non-MG fired brass everything is just fine.
  9. Thanks... Other than that, has the block held up well? Side adjustment is of no concern to me, I was eyeballing the receiver height railed gas block they have for a 300 build upper that's using a traditional drop in handguard/delta ring set up with a 16" carbine gas barrel, and wanted an adjustable block to dial it in if I ever decide to run subs in it, as I have read/heard carbine length gas and subs often don't work well together with out an adjustable block.
  10. I have been interested in the BTE, can you tell me what you don't like about it?
  11. My .02 I am not in the camp of "don't bother wasting your time loading plinking ammo" BUT.............it only makes sense if you buy in bulk, and use free brass. I make all my plinking ammo out of once fired brass that I pick up from the range that I either bought as new factory ammo and fired myself, or was given to me by other shooters. Buying brass to load into range fodder kills the savings aspect, which is slim to begin with. Then there is the time factor.... Some people put too much value on their time. Sitting at the reloading bench making plinking ammo is fun, and beats the heck out of watching TV. It's also a good skill set to have, just in case you ever really need to use it. Just don't waste too much time with it. Making a safe, reliable, accurate load for blasting with an AR is not difficult.
  12. That would be handy to keep in the truck and for the boat trailer tires, and I do have Ryobi tools...Thanks!! I didn't know that existed.
  13. Gasbar

    opinions on this upper please

    Primary arms is GTG. Troy...................I'd rather not give them any of my money for personal reasons that will remain kept to myself (a google search will give you a clue). That being said, from all accounts, Troy makes quality products. It's up to you if you want to support them.
  14. Gasbar

    New guy here

    From one new guy to another welcome. I have only been here a few days, but so far it's been a friendly place, with knowledgable people. I am sure you'll find all the info you need for your build/purchase. Have fun.
  15. Gasbar

    Any good 30 carbine loads?

    I have never bought plated bullets for loading 30 carbine, because I was always told to keep plated bullet velocities under 1500 FPS. And 30 carbine is NOT a cartridge that lines up powder wise real well out side of that 1800-1900 FPS window that it was designed for, nor do M1 carbines cycle real well with powder puff loads (so I have been told). Most of my loads are high mid range to near max (it's soft shooting to begin with) and some powders like H110/W296 you are told to not under load EVER. As a plinking toy, a lb or two of powder and a 1000 FMJ bullets lasts me a long time, as I do most of my blasting with AR's and 9mm handguns, so the extra cost of FMJ bullets isn't too much to me. The last batch of FMJ bullets I bought were Armscor 110 grainers from Graffs , 500 for $57.45 + $7 shipping. I buy all my plated handgun bullets from Xtreme, and their 30 carbine bullets were $50/500 + shipping. The cost difference wasn't enough for me to worry about using plated and pushing them too fast.
×