CLASS_06_FFL 1 Posted December 23, 2009 M1 30 Carbine Brass Lake City any year except 52' (berdan primed) or 43' (crimped primer pocket) Bullet Win. 110g. FMJ Primer #41 CCI Powder H110 14g. or Win 296 14g. mimicks military load. It is the min. load in Lymans & Win chest load data center Rifle M1 carbine 2006 FPS / 32,000 CUP Nice recoil great load for any M1, I have also loaded 100,000+ rds of this for my customers. these old military rifle just love this load. 1 Quote Share this post Link to post Share on other sites
shrpshtrjoe 0 Posted January 10, 2010 Barnes 62 grain TSX 25 Grains Varget Rem Cases Shoots Fantastic in my Colt Hbar Joe Quote Share this post Link to post Share on other sites
HKgnnr 0 Posted January 28, 2010 I've been using Ramshot X-Terminator for Hornady 55gr FMJs - 16" 1x7 (tested with CMMG, Sabre, and Yankee Hill barrels - give it about 25fps either way) 2.23 OAL LC Brass CCI #41 24.8gr - 2930fps 24.9gr - 3000fps I have noticed the lighter loads give better accuracy by about .25 inch @ 100 Quote Share this post Link to post Share on other sites
waterdog69 0 Posted February 7, 2010 223 Remington Loads that shoot great in 1-7", 1-8", 1-9', and 1-12" twist barrels have shot many single hole groups with both loads 52gr Sierra Matchking full case approx. 28gr Varget CCI 400 primer OAL 2.260 52gr SMK 25gr H335 CCI 400 primer OAL 2.260 Quote Share this post Link to post Share on other sites
ballistics04 0 Posted March 15, 2010 (edited) anyone have a good load for 20" stainless barrel 1:8 twist ar 15 H4895 23.5gr LC brass Rem 7.5 SR primers 2.25 OAL 75gr Hornady BTHP Case trim length is standard by-the-book great 200 and 300 yard load out of my 1:8 twist 20" stainless match barrel. Todd Edited March 15, 2010 by ballistics04 Quote Share this post Link to post Share on other sites
mdripley 0 Posted March 29, 2010 AR15 1/7" 20"BBL. Hornady 68gr HPBT Match 25.5gr Win 748 OAL 2.250" Quote Share this post Link to post Share on other sites
bob72 9 Posted April 3, 2010 65gr siera match king 24.3 gr H335 Rem Bench Rest 7 1/2 primer C.O.L 2.238-2.24 Del-Ton 16in Chrome 1/7 Mixed Brass Nice Shooter Havent been able to test for 100yrd accuracy but 25yrds blows a Quarter size hole out of the target Off handed! I can go Hotter but trying for a cheap load Quote Share this post Link to post Share on other sites
bigjoeguns 0 Posted April 7, 2010 NOVESKE N4 20 inch stainless barrel in 5.56 1:7 twist RH 69 gr Sierra BTHP 24.8 g Varget cci 400 primers mixed brass properly processed sub .125 50 yrd. groups sub .500 100 yrd groups sub 2.500 300 yrd groups (should do better) no vise, just a good rest no chrony yet same thing with the 75 gr HPBT with 24.5 gr varget Quote Share this post Link to post Share on other sites
facemelter 0 Posted April 13, 2010 (edited) Gun info. Rock River bolt. 24" M1S 1-8 twist stainless fluted bull barrel,with free float. Reload info. PMC brass (all I had at the time) Case trim length.-1.750 Primer-Remington Brench rest 7-1/2 Powder- Hodgdon H-335 22grains Bullet-55 grain premier accutip-v polymer tip. OAL-2.250 (i think),im going off memory.Its written some where.I will verify when I get home. Shooting at 100 yards,slight wind 5-10 mph off of a bench rest.The first three shots are to the left.After I settled down on the bench,the shots are pretty close.Still tweaking the scope in,this is the second time out with new upper assembly and scope. Edited April 13, 2010 by facemelter Quote Share this post Link to post Share on other sites
bob72 9 Posted May 1, 2010 Found a Nice load for 16in chrome 1/7 Del-Ton with 50 gr Rem fmj's Brass= Mixed trimed to min Bullet= 50 gr Rem fmj Powder= 23gr H335 Primer= Rem 71/2 bench rest SR COL= 1.213 (going off memory) I loaded up to 25.5 gr in .5gr incruments Once I got above 24grs the group really opened up!! Shoot at about 45yrds on bench with NO bags or support except my arms!! Very pleased with the group as this is a CHEAP plinking round Quote Share this post Link to post Share on other sites
bob72 9 Posted May 1, 2010 I did a Load for .45acp brass= Mixed and preped Bullet= 230FMJ Powder= 6.5gr of Power Pistol Primer= CCI LP Gun= 1911 with a Springer Lower and barrel and an Auto Ordance Slide. 5in barrel Very Nice shooting load! Good grouping Nice recoil!! Need to try out in my wifes Springer compact with the 4in barrel Quote Share this post Link to post Share on other sites
norcalwelder 14 Posted May 5, 2010 Gun: 20" Delton/MEGA HBAR 1-9 Powder: 25.0grns Benchmark Bullet: 55gr VMAX Moly Case: mixed OAL: 2.2" Primer: CCI 400 Results: the best group I've shot so far, .73". Quote Share this post Link to post Share on other sites
Direwolf 63 Posted May 21, 2010 Vmax Varmint roundAR15 20" Barrel 1/9 twist All .223 Brass 24.7 grains H335 CCI 400 Small rifle primer 55 Grain Hornady Vmax ballistic tip 2.25" OAL I have three AR-15s all with the same barrels. This has been shooting around 1.5 at 300 yards. The wild hogs here in West Texas never hear it coming. Are you shooting them in the head or in the chest area? I've been trying to figure out a round that will work well on the pigs we have here in Louisiana. Some of them are pretty big and I know a 223 ain't getting through that plate. I do know it will work fine shooting them just behind the ear, though! Quote Share this post Link to post Share on other sites
THESPECIALIST 0 Posted July 31, 2010 (edited) A couple 45 ACP loads that I worked up: Target Load Hornady 200gr LSWC .452" Dia Mixed Cases-WCC, R-P, Speer, TZZ Match Hodgdon HS-6 7.5gr CCI LP Primers COL-1.190" The most accurate target load I have for my RIA 1911. Palm sized 25yd groups with no flyers. Mild recoil, very fast back on target. A little dirty and a little smoky, but it's cheap to shoot SD Load (once I get to chrono it) Hornady 230gr XTP/HP .451" Dia. Starline +P Cases Hodgdon Longshot 6.8gr CCI LP Primers COL-1.200" THIS IS A MAX LOAD ACCORDING TO HODGDON FOR A BULLET WITH LESS BEARING SURFACE THAN THE XTP AND IS LOADED .030" SHORTER THAN RECOMMENDED BY HORNADY. APPROACH WITH CAUTION! I used the +P cases for a little extra insurance. No pressure signs in MY gun. This is definitely a full house 230gr load. Recoil is very stiff, but not that bad. Follow up shots can be made fairly quickly once you are used to the recoil. My RIA 1911 throws these into 2" groups at 15yds consistently when I do my part. Edited July 31, 2010 by THESPECIALIST Quote Share this post Link to post Share on other sites
rbakis 0 Posted August 16, 2010 Sierra Match King 69 gr. Once fired Lake City brass Winchester Small Rifle primer 25.5 grains of Accurate 2520 COL: 2.250 " 2,974 fps from 20" 1:9 Bushmaster barrel, Rock River lower .5 to .75 inch groups at 100 yds. Quote Share this post Link to post Share on other sites
